Wholesale API rotating head for drilling rig in stock based on the lowest quotation and excellent quality from China factory
Bit Description:
IADC: 127 - Steel tooth journal sealed bearing bit with gauge protection for soft formations with low compressive strength and high drillability.
Compressive Strength:
0 - 35 MPA
0 - 5,000 PSI
Ground Description:
Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals.
We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 ” to 26”) and most of IADC Codes.
|
Basical Specification |
|
|
Size of Rock Bit |
9 5/8" |
|
244.5mm |
|
|
Bit Type |
Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
|
Thread Connection |
6 5/8 API REG PIN |
|
IADC Code |
IADC 127 |
|
Bearing Type |
Journal Sealed Roller Bearing |
|
Bearing Seal |
Rubber Seal |
|
Heel Protection |
Available |
|
Shirttail Protection |
Available |
|
Circulation Type |
Mud Circulation |
|
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
|
Nozzles |
3 |
|
Operating Parameters |
|
|
WOB (Weight On Bit) |
16,403-46,698 lbs |
|
73-208KN |
|
|
RPM(r/min) |
60~180 |
|
Formation |
Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc.
|
|
Basical Specification |
|
|
Size of Rock Bit |
9 7/8" |
|
250.8mm |
|
|
Bit Type |
Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
|
Thread Connection |
6 5/8 API REG PIN |
|
IADC Code |
IADC 127 |
|
Bearing Type |
Journal Sealed Roller Bearing |
|
Bearing Seal |
Rubber Seal |
|
Heel Protection |
Available |
|
Shirttail Protection |
Available |
|
Circulation Type |
Mud Circulation |
|
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
|
Nozzles |
3 |
|
Operating Parameters |
|
|
WOB (Weight On Bit) |
16,853-47,902 lbs |
|
75-213KN |
|
|
RPM(r/min) |
60~180 |
|
Formation |
Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc.
|
9 5/8 inches milled tooth bit IADC127GT is a regular size with Edge-Row inserts in water well drilling, it is working well with small capacity drilling rigs and widely used in the world.
Far Eastern is professional on milled tooth tricone bit, the production activities are in lines of API standard, the quality is strictly controlled by following ISO9001.
We provide service for:
1>Drilling contractors.
2>Drilling tools distributors.
3>Oil companies onshore and offshore.
4>Trenchless/HDD companies.
5>Piling companies.