The Far Eastern Drilling has built a high-performance tricone bit, roller cone bit, hole opener and PDC bit production line with advanced technology, complete equipment and standardized management .Has formed 3 inch to 26 inch tricone drill bit and 8inch to 56inch hole opener and PDC drill bit has been produced on a large scale. Each product is manufactured and inspected in strict accordance with the industry's highest technical quality standards and API specifications. The quality assurance system established in accordance with the requirements of ISO 9001 and API ensures the best quality of the products and the effective operation of the company.
|
Basical Specification |
|
|
Size of Rock Bit |
9 7/8" |
|
250.8mm |
|
|
Bit Type |
Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
|
Thread Connection |
6 5/8 API REG PIN |
|
IADC Code |
IADC 127 |
|
Bearing Type |
Journal Sealed Roller Bearing |
|
Bearing Seal |
Rubber Seal |
|
Heel Protection |
Available |
|
Shirttail Protection |
Available |
|
Circulation Type |
Mud Circulation |
|
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
|
Nozzles |
3 |
|
Operating Parameters |
|
|
WOB (Weight On Bit) |
16,853-47,902 lbs |
|
75-213KN |
|
|
RPM(r/min) |
60~180 |
|
Formation |
Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc.
|
Advantage of steel tooth tricone bit:
1>Higher penetration rate. The longer teeth has faster drilling down speed.
2>Anti-balling. The sticky rocks always make bit-balling, steel tooth tricone bit is suitable for drilling soft formations and sticky rocks.
3>IADC127 has tungsten carbide inserts on gauge of cones, this feature is well to avoid diameter-shrinkage.