There are many types of drill bits used in the petroleum industry and mining industry. The drill bits are classified according to different drilling methods. They can be divided into PDC drill bits, roller cone bits, scraper bits and mining diamond coring bits. These drill bits are the most basic drill bits and we all can provide.
|
Basical Specification |
|
|
Size of Rock Bit |
5 7/8" |
|
149.2 mm |
|
|
Bit Type |
Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
|
Thread Connection |
3 1/2 API REG PIN |
|
IADC Code |
IADC 117 |
|
Bearing Type |
Journal Sealed Roller Bearing |
|
Bearing Seal |
Rubber Seal |
|
Heel Protection |
Anvailable |
|
Shirttail Protection |
Available |
|
Circulation Type |
Mud Circulation |
|
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
|
Nozzles |
Central Jet Hole |
|
Operating Parameters |
|
|
WOB (Weight On Bit) |
11,684-25,166lbs |
|
52-112KN |
|
|
RPM(r/min) |
60~180 |
|
Formation |
Very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk,etc. |
5 7/8" mill tooth tricone drill bit is widely used in water well drilling, oil well drilling, geothermal well drilling, it can be used for drilling cement plug in very deep well.
The mill tooth tricone drill bit has longer teeth which could get much faster drilling down speed than TCI drill bits.