Drill bits are used in the oil and gas industry as a component which produces holes of almost circular cross-section in the earth’s crust for the extraction of crude oil and natural gas. It is majorly deployed in the rotary drilling method to produce the hole in the fields. There are various types of drill bits of different shapes and sizes. These are used by the industry to remove materials in order to create holes.
Our tricone rock drill bit iadc537 have in stock. Windly used in soft to medium soft formations with lowe compressive strength.It is TCI journal sealed bearing with gauge protection.It will be used for sandstones with quartz binder, quartzite shale,magma,dolomites and metamorphic coarse grained rocks.
|
Basical Specification |
|
|
Size of Rock Bit |
6 inches |
|
152.4 mm |
|
|
Bit Type |
Tungsten Carbide Insert (TCI) bit |
|
Thread Connection |
3 1/2 API REG PIN |
|
IADC Code |
IADC537G |
|
Bearing Type |
Journal Bearing |
|
Bearing Seal |
Metal sealed |
|
Heel Protection |
Available |
|
Shirttail Protection |
Available |
|
Circulation Type |
Mud Circulation |
|
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
|
Total Teeth Count |
90 |
|
Gage Row Teeth Count |
40 |
|
Number of Gage Rows |
3 |
|
Number of Inner Rows |
7 |
|
Jounal Angle |
33° |
|
Offset |
4.8 |
|
Operating Parameters |
|
|
WOB (Weight On Bit) |
11,909-35,952 lbs |
|
53-160KN |
|
|
RPM(r/min) |
300~60 |
|
Recommended upper torque |
9.5KN.M-12.2KN.M |
|
Formation |
Soft formation of low crushing resistance and high drillability. |