Wholesale API steel tooth tricone rock roller drill bit in stock based on the lowest quotation and excellent quality from China factory
Bit Description:
IADC: 215 - Steel tooth sealed roller bearing bit with gauge protection for medium to medium hard formations with high compressive strength.
Compressive Strength:
0 - 35 MPA
0 - 5,000 PSI
Ground Description:
Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals.
We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 ” to 26”) and most of IADC Codes.
According to cutting material,three cones bit can be divided into TCI bit and Milled Tooth Bit
Milled tooth tricone bit IADC215 is for very soft formation. Choose the proper rocks drilling bits is very important before starting project.
Rocks hardness could be soft , medium and hard or very hard, hardness of one type of rocks may be also a little different, for example, limestone, sandstone, shale has soft limestone, medium limestone and hard limestone, medium sandstone and hard sandstone , etc.
In drilling project, Far Eastern have 15 years and more than 30 countries services experience to supply the drill bits and advanced drilling soulutions for many different applications. The application including oil field,natural gas,geological exploration,driectional boring,mining ,water well drilling ,HDD, construction,and foundation.The various drill bits can be customized as per different rock formation becasue we have our own API & ISO certified factory of drill bits. We can give our engineer's solution when you can supply specific conditions, such as hardness of rocks,types of drilling rig,rotary speed,weight on bit and torque. It is also hlep us to find the siutable drill bits after you can tell us vertical well drilling or horizontal drilling ,oil well drilling or No-Dig drilling or foundation piling.
| Basical Specification | |
| Size of Rock Bit | 8 1/2" |
| 215mm / 216mm | |
| Bit Type | Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
| Thread Connection | 4 1/2 API REG PIN |
| IADC Code | IADC 215 |
| Bearing Type | Journal Sealed Roller Bearing |
| Bearing Seal | Rubber Seal |
| Heel Protection | Available |
| Shirttail Protection | Available |
| Circulation Type | Mud Circulation |
| Drilling Condition | Rotary drilling,high temp drilling,deep drilling,motor drilling |
| Nozzles | 3 |
| Operating Parameters | |
| WOB (Weight On Bit) | 16,853-45,839 lbs |
| 75KN-204KN | |
| RPM(r/min) | 60~150 |
| Formation | Medium formations with high compressive strength, such as medium soft shale,medium soft limestone,medium formation with harder and abrasive interbeds ,etc. |
Steel tooth tricone bits are also named milled tooth tricone bit, "steel" means the teeth material is steel, actually it is a type of special steels 15MnNi4Mo and the surface of steel material is hard faced by Tungsten Carbide to increase wear resistance.
Milled means the teeth is machined by milling machine, so steel tooth tricone bits have another names "mill tooth tricone bits" or "milled tooth tricone bits".
8 1/2 inches is always diameter of the first hole in deep well drilling, the formations are always soft in shallow section, so 8 1/2" is widely used in worldwide.
Specifications of 8 1/2" Steel Tooth Tricone Bit Dense teeth on cones of tricone bits means smaller teeth and harder rocks drilling capacity, shorter and smaller teeth makes milled teeth tricone drill bit can even drill soft or medium hardness rocks and the ROP is higher than TCI tricone bits. Surface of cones are enhanced by tungsten carbide hard-facing.
Please contact us to get more information, Far Eastern attends exhibitions in many countries worldwide, hopefully to talk with you face to face in near future.