Wholesale API steel tooth tricone rock sealed drill bits in the stock based on the lowest price and excellent quality from China factory
Bit Description:
IADC: 127 - Steel tooth journal sealed bearing bit with gauge protection for soft formations with low compressive strength and high drillability.
Compressive Strength:
0 - 35 MPA
0 - 5,000 PSI
Ground Description:
Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals.
We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 ” to 26”) and most of IADC Codes.
According to cutting material,three cones bit can be divided into TCI bit and Milled Tooth Bit
Steel tooth tricone bits have another name milled tooth tricone bit since the teeth are produced by milling machine, the cone surface is hard-faced by tungsten carbide.
Steel tooth tricone bits have another name milled tooth tricone bit since the teeth are produced by milling machine, the cone surface is hard-faced by tungsten carbide.
When you choose a FAR EASTERN drill bit, you get the right bit for the right application, so you can stay in the hole longer with fewer trips, at a lower cost-per-foot. Because we’ve been engineering this technology successfully for more than 15 years, we are confident in our legacy and that no other drill bit manufacturer can match our expertise.
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for different applications.
As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.
|
Basical Specification |
|
|
Size of Rock Bit |
6 1/4" |
|
159.80mm |
|
|
Bit Type |
Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
|
Thread Connection |
3 1/2 API REG PIN |
|
IADC Code |
IADC 127 |
|
Bearing Type |
Journal Sealed Roller Bearing |
|
Bearing Seal |
Rubber Seal |
|
Heel Protection |
Available |
|
Shirttail Protection |
Available |
|
Circulation Type |
Mud Circulation |
|
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
|
Nozzles |
Central Jet Hole |
|
Operating Parameters |
|
|
WOB (Weight On Bit) |
10,772-30,521 lbs |
|
48-136KN |
|
|
RPM(r/min) |
60~180 |
|
Formation |
Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc. |
6 1/4" mill tooth tricone drill bit is widely used in water well drilling, oil well drilling, geothermal well drilling, it can be used for drilling cement plug in very deep well.
The mill tooth tricone drill bit has longer teeth which could get much faster drilling down speed than TCI drill bits.