The tricone drill bit is the most popular drilling bit in the world,it can be widely used for Oil&Gas Drilling,Mining,Water Well,Geological Exploration areas.Our tricone bit divideds into metal sealed drill bit and rubber sealed bit.
1. The C-Center jet can avoid the formation of a ball in the bit, eliminate the fluid area at the bottom of the well, accelerate the upward flow of drilling cuttings and improve ROP.
2. High saturation NBR bearings can reduce sealing pressure and improve sealing reliability.
3. The G-Gauge protection improves the measuring ability and prolongs the service life of the bit.
4. Adding a row of teeth between the rear taper and the outflow to trim the borehole and protect the cone.
6" Inches Sreel Tooth Tricone Bit IADC126 Soft Formation Well Drilling Choose the correect and suitable IADC code to reach the best cost-effective, we are pleasant to choose the right tricone bits according to your geological information.
|
Basical Specification |
|
|
Size of Rock Bit |
6" |
|
152.40mm |
|
|
Bit Type |
Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
|
Thread Connection |
3 1/2 API REG PIN |
|
IADC Code |
IADC 126 |
|
Bearing Type |
Journal Sealed Roller Bearing |
|
Bearing Seal |
Rubber Seal |
|
Heel Protection |
Unvailable |
|
Shirttail Protection |
Available |
|
Circulation Type |
Mud Circulation |
|
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
|
Nozzles |
Central Hole |
|
Operating Parameters |
|
|
WOB (Weight On Bit) |
11,909-33,626 lbs |
|
53-150KN |
|
|
RPM(r/min) |
60~180 |
|
Formation |
Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc.
|